3
Softkey Operations
Softkeys provide additional operator functions for specific applications. Softkey assignments are listed on the tabs
shown at the bottom of the LCD display; softkey functions are activated by pressing the arrow keys below the
softkey tabs (see Figures 1 and 2 on page 1).
The particular set of softkeys shown
on the display can be set using Revolution.
Table 1. Configurable Softkeys
Softkey Description
More Information can be found in the
720i Installation Manual (PN 103121)
within the following sections
Time/Date Displays current time and date; allows time and date
change.
See "DATE" and “TIME” on page 37 in
Tab l e 3-7.
Display Tare Displays tare value for the current scale See “TAREFN” on page 23 in Tab le 3-2.
Display Accum Displays accumulator value, if
enabled, for the current
scale.
See “Accumulator Functions” on page 3.
Display ROC Displays rate-of-change value,
if enabled, for the current
scale.
See “ROC” on page 22 in Tabl e 3-3.
***Weigh In Allows truck ID entry; generates weigh-in ticket for truck
weigh
ing applications.
See “Weigh-In Procedure” on page 59.
***Weigh Out Allows truck ID entry; generates weigh-out ticket
for truck
weighing applications.
See “Weigh-Out Procedure” on page 56.
***Truck Regs Displays truck register; allows deletion of individual or all
entr
ies. Truck register can be printed by pressing the
PRINT key while the truck register is displayed.
See “Using the Truck Regs Display” on page 55.
Alibi Allows previous print transactions to be recalled and
r
eprinted.
See “Alibi Tracking” on page 110.
F1–F10 User-programmable keys; defined by PCEE. See “Using ProAction
PCEE” on page 81.
**Se
tpoint Displays a menu of configured setpoints; allows display
and change of some setpoint parameters.
See “Setpoints” on page 65.
**Batch Start Starts a configured batch. See “Batch and Continuous Setpoints” on
page 62.
**Batch Stop Stops a running batch and turns off all associated digital
outputs. Requires a batch start to resume processing.
See “Batch and Continuous Setpoints” on
page 62.
**Batch Pa
use Pauses a running batch. (Same as stop, but digital
outputs, if on, are not turned off.)
See “Batch and Continuous Setpoints” on
page 62.
**Batch Reset Stops a batch and resets it to the first batch step. See “Batch and Continuous Setpoints” on
page 62.
*Weigh Start the Weigh-In and Weigh-Out Procedure. See “Weigh-In Procedure” on page 59 and
“Weigh-Out Procedure” on page 56.
*Reports Select which report to print. There are four sub menus
un
der the Reports softkey: Summary, Daily, Detail, and
Code List.
See “Advance Mode Menus” on page 60.
*Management Add and remove mater
ials, customers, and source IDs
and names.
See “Advance Mode Menus” on page 60.
More… For applications with more than three defined softkeys,
the
More… key is automatically assigned to the fourth
softkey position. Press More… to toggle between groups
of softkeys.
* Advance Truck Mode only
** 720i Batching Version software only
*** Truck Modes 1-6 only
See “Truck Modes” on page 58.
See “VERSION” on page 20
in Tab le 3-1.
See “Truck Modes” on page 58.
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales