Rice-lake 880 Performance Series Indicator/Controller Operat Manual de usuario descargar pdf (Pagina 14)

Introduction 10

ACCUM

is only displayed if the accumulator is enabled.

3. Press , VIEW is displayed.

4. Press to view the current accumulator value.

5. While the accumulator value is displayed, press to print the value.

The format of the print ouput can be configured using accumulator print

format. See Section 7.0.

1.4.13 Clear the Accumulator

1. Press to enter the user setup mode, AUDIT is displayed.

2. Press or until

ACCUM is displayed.

3. Press , then press or until

CLR Y is displayed.

4. Press to clear the accumulator,

CLEAR will display briefly and

display returns to

CLR Y.

5. Press to return to the weigh mode.

The PRINT key only performs one accumulation. Weight must return to

zero below the configured threshold value before another accumulation

is allowed.

Threshold is configured in the setup menu, see Section 3.2.3.

1.4.14 Display Tare

When a stored Tare value is displayed, the Gross and Net LEDs will be off and the

will be lit. To display a stored tare:

1. Press .

2. Press to

TARE and press to view the current tare value.

3. Press twice to return to weighing mode.

If there is no tare in the system, the value displayed will be zero and the Gross and

Net LED will be turned off.

See the Technical Service Manual (PN 158387) for more information pertaining to

the regulatory mode of operation.

Note

TARE

Note

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sin comentarios

Rice-lake 880 Performance Series Indicator/Controller Operat Manual de usuario Pagina 14