Rice-lake 880 Performance Series Indicator/Controller Operat Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 36
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
1 880 Operator’s Manual
About This Manual
This manual is intended for use the operator of the 880 digital weight indicators and
applies to indicators using Version 1.01 of the 880 software.
The Technical/Service manual (PN 158387) that is referred to throughout this manual
and is available online.
Manuals can be viewed or downloaded the Rice Lake Weighing Systems
website at
www.ricelake.com/manuals.
Please leave this manual with the indicator when installation and configuration are
complete.
1.0 Introduction
The 880 is a single-channel digital weight indicator housed in a panel mount
enclosure. The front panel bezel can be sealed to a NEMA 4X/IP65 rating. The front
panel consists of a 6-button keypad; a large, seven-digit, 14-segment, vacuum
fluorescent display; two-character dot-matrix annunciator field; and 16-character dot-
matrix prompt field. Features include:
Drives up to 8 350
or 16 700 load cells
Supports four and six wire load cell connections
Four configurable digital inputs or outputs
Full duplex RS-232 or half duplex RS-485 communications up to 115200 bps
Ethernet TCP/IP interface for 10Base-T/100Base-TX network communications
USB interface for host (type A connection) or device
Expansion slot for one option card
Optional DeviceNet
interface for communications network with Allen-
Bradley
®
controllers
1
Optional Ethernet/IP interface for Allen-Bradley PLC and other Ethernet/IP
master devices
3
Optional Profibus
®
DP interface
2
Optional Modbus TCP interface
Optional Profinet Interface
Optional analog output module provides 0–10 VDC, 0-20mA or 4–20 mA
tracking of gross or net weight values
Optional four channel relay module, dry connect 3A @ 115VAC, 3A @ 30VDC
Available in 115 VAC and 230 VAC versions
1. DeviceNet
is a trademark of the Open DeviceNet Vendor Association.
2. Profibus
®
is a registered trademark of Profibus International.
3. EtherNet/IP
is a trademark of the Open DeviceNet Vendor Association.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10 ... 35 36

Comentarios a estos manuales

Sin comentarios