Rice-lake 880 Performance Series Indicator/Controller Techni Manual de usuario Pagina 10
- Pagina / 120
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Table 1-1. Key Functions
Key Function
ZERO
Sets the current gross weight to zero.
Also used to navigate to different menu levels or use
d to increment a number when editing a value.
PRINT
Sends “on-demand” print format out a communications port, provided the conditions for standstill are met. If
enabled in configuration, PRINT may be displayed while the unit prints.
Also used to navigate to different menus or to select another digit when editing a value.
GROSS
NET
B/N
Toggles between gross and net. If a tare value has been entered or acquired, the net value is the gross weight minus
the tare.
Gross mode is shown by the Gross/Brutto annunciat
or; net mode is shown by the Net annunciator.
Also used to navigate to different menu levels or to
decrement a number when editing a value.
MENU
The MENU key is used to access the user setup menu.
Acts as the cancel key when editing parameter values.
Acts as an exit when in the setup or user setup
menus.
UNITS
Switches the weight display to an alternate unit, defined in the Format menu, see Figure 3-9 on Page 34.
Units Available: lb, kg, oz, metric ton, ton, gram.
Also used to navigate to different menus or t
o select another digit when editing a value.
TARE
Performs one of several predetermined Tare functions dependent on the mode of operation selected in the TAREFN
parameter.
Also acts as “Enter” for numeric or parameter entry.
4 880 Technical/Service Manual
Key Function
Gross
Brutto
Net
Gross/Brutto LED
Gross weight mode (or Brutto in OIML mode)
Net LED
Net weight mode.
0
Center of Zero LED
Indicates that the current gross weight reading is within +/- 0.25 display divisions of the acquired zero, or
is within the center of zero band.
A display division is the resolution of the displayed weight value, or the smallest incremental increase or
decrease that can be displayed or printed.
Standstill LED
Scale is at standstill or within the specified motion
band. Some operations, including Zero, Tare and
Printing, can only be done when the standstill LED is on.
lb
kg
kg
lb
lb/kg LED
Displays which unit of measure is being used.
The lb and kg annunciators indicate the
units associated with the displayed value. If the displayed value is
pounds, lb will be lit. If the displayed value is kilograms, kg will be lit.
lb
kg
primary
secondary
primary/secondary LED
If the other units value is neither lb or kg, then lb will be l
it for the units assigned as primary, and kg will be
lit for the units assigned as secondary.
lb
kg
tn, t, oz,
lb
g or none
lb/tn,t,oz,g,none LED
Alternate conversions that can be displayed in
clude short tons (tn), metric tons (t), ounces (oz), grams (g),
or NONE (no units). If the displayed units is one of these alternate conversions, and the other unit value is
lb, then kg will be lit.
lb
kg
tn, T, oz,
kg
g or none
tn,t,oz,g,none /kg LED
Alternate conversions that can be displayed in
clude short tons (tn), metric tons (t), ounces (oz), grams (g),
or NONE (no units). If the displayed units is one of these alternate conversions, and the other unit value is
kg, then lb will be lit.
Table 1-2. Annunciator Functions
- 880 Performance Series 1
- Technical/Service 1
- Contents 3
- About This Manual 7
- 1.0 Introduction 7
- General Safety 8
- 1.2 Operating Modes 9
- 1.3 Front Panel Display 9
- Center of Zero LED 10
- Standstill LED 10
- 1.4 Indicator Operations 11
- 1.4.7 Print Ticket 12
- 1.4.8 Front Panel Setup 12
- 1.4.10 Setpoints 13
- Turn Setpoint On or Off 13
- 1.4.11 Set Time and Date 14
- 1.4.12 Display Accumulator 14
- 1.4.13 Clear the Accumulator 14
- 1.4.14 Display Tare 15
- 2.0 Installation 16
- 2.2 Panel Mount Installation 17
- Important 18
- J1 J2 J3 J4 J5 J6 19
- 2.4 Display Board Replacement 22
- 2.5 Cable Connections 22
- 2.6 USB Host 24
- 2.7 Ethernet Communications 24
- 2.8 CPU Board 25
- 2.10 Board Replacement 26
- 2.11 Digital I/O 28
- 2.12 Legal for Trade Sealing 28
- 2.13 Option Cards 29
- 2.14 Battery Replacement 29
- 2.15 Replacement Parts 30
- 3.1.3 User Setup Menu 33
- 0 0 0 0 0 0 34
- 3.2.1 Audit Menu 35
- 3.2.2 Setup Menu 36
- 37
- SCALE Menu 38
- 3.2.4 FORMAT Menu 40
- FORMAT Menu 41
- 3.2.5 Calibration Menu 42
- FEATUR Menu 44
- COM Menu 50
- ETHERNET Menu 52
- 3.2.11 USB Host 53
- 3.2.12 Print Format Menu 54
- Configuration 51 57
- SETPTS Menu 58
- 4.0 Calibration 63
- 4.1 Front Panel Calibration 64
- 4.1.2 Rezero 65
- 4.5 Gravity Compensation 66
- 4.6 EDP Command Calibration 67
- 4.7 Revolution 67
- Calibration 67
- 5.0 Using Revolution 68
- 5.2 Configuration 69
- 5.4 Revolution Help 70
- 6.0 EDP Commands 71
- 6.1.2 Reporting Commands 72
- Scales Menu 73
- Format Menu 73
- Calibration Menu 74
- Ports COM Menu 74
- Ports – Field Bus Menu 75
- Ports – Ethernet Menu 75
- Ports – USBCOM Menu 76
- Stream Tokens Menu 76
- Feature Menu 76
- Regulatory Menu 77
- Time and Date 77
- Passwords Menu 77
- Keypad Lock Menu 77
- Setpoints Menu 78
- Print Format Menu 80
- Analog Out Menu 80
- 6.1.5 Normal Mode Commands 81
- Digital I/O Control Menu 82
- 6.1.6 ERROR Commands Output 82
- 7.0 Print Formatting 83
- 7.2 Default Print Formats 84
- 7.3 Customizing Print Formats 85
- 7.3.3 Using Revolution 86
- 8.0 Setpoints 87
- 8.2 Batch Operations 89
- 8.3 Batching Examples 91
- Example 2 92
- 9.0 Ethernet and USB 93
- Ethernet and USB 89 95
- Using Revolution 96
- with Ethernet 96
- 9.2 USB Host 97
- 9.2.2 USB Memory storage 98
- Saving Configuration 98
- Loading Configuration 98
- 10.0 Appendix 100
- 10.3 ERROR Commands Output 101
- 10.4 Status Messages 102
- 10.6 Data Formats 103
- <STX> 104
- ONTROL-B>AXG#1<CR> 105
- 10.8.1 Toledo 8142 Indicator 108
- 10.8.2 Cardinal 738 Indicator 109
- 10.9 ASCII Character Chart 111
- 10.10 Digital Filtering 113
- (Section 4.0) 114
- 10.12 Specifications 115
- 880 Limited Warranty 116
- For More Information 117
- PN 158387 Rev C 120
Relacionado con productos y manuales para Escamas Rice-lake 880 Performance Series Indicator/Controller Techni
(4 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.138 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales