Rice-lake 880 Performance Series Indicator/Controller Techni Manual de usuario descargar pdf (Pagina 59)

Configuration 53

PCOUNT 1

1–65535

Preact learn interval. For setpoints with PREACT set to LEARN, specifies the number

of batches after which the preact value is recalculated. The default value, 1,

recalculates the preact value after every batch cycle.

RELNUM 1

1–20

For %REL setpoints, specifies the number of the r

elative setpoint. The target weight for

this setpoint is the percentage (specified on the VALUE parameter of the %REL

setpoint) of the target value of the relative setpoint

BATSEQ OFF

Specifies whether the setpoint is used as a batch (ON) or continuo

us (OFF) setpoint.

CLRACM OFF

Specify ON to clear the accumulator

when the setpoint is satisfied

CLRTAR OFF

Specify ON to clear the tare when th

e setpoint is satisfied

PSHACM OFF

ONQUIE

Specify ON to update the accumulator and perform a

print operation when the setpoint

is satisfied (uses the accumulator print format). Specify ONQUIE to update the

accumulator without printing.

PSHPRT OFF

WAITSS

Specify ON to perform a print operation when the setpoint is satisfied; specify WAITSS

wait for standstill after setpoint is satisfied before printing.

Note

For AUTJOG setpoints, it will print only once the previous setpoint is

satisfied. Instead of printing the setpoint print format, it will print the

OSS or NET print format (depends on the type of the previous

setpoint).

PSHTAR OFF

Specify ON to perform an acquire tare opera

tion when the setpoint is satisfied.

Note

PSHTAR acquires the tare regardless of the value specified for the

REGULA parameter in the FEATUR men

u, and regardless of the

stability.

If two or more of the CLRxx

x and PSHxxx parameters are set on, the actions specified by those parameters

are performed in the following order when the setpoint is sa

tisfied: 1) clear accumulator; 2) clear tare; 3)

accumulate; 4) print; 5) acquire tare.

ACCESS ON

OFF

Specifies the access allowed to setpoint parameters sh

own in the new user menu.

ON: Values can be displayed and changed

OFF: Values can be displayed but

not changed

NAME 6ALPHA A six character alphanumeric name for the setpoint.

SLOT NONE

SLOT 0

SLOT 1

Lists all available digital I/O slots.

SLOT 0 – onboard DIO

SLOT 1 – Option card (if installed)

Note

A slot will only appear if one or more of its individual bits are

configured as an output.

DIGOUT BIT 1-4 Lists all digital output bits available for the

specified SLOT. This parameter is used to

specify the digital output bit associated with this setpoint. Use the DIG I/O menu to

assign bit function to OUTPUT.

For continuous setpoints, the digital output becom

es active (low) when the condition is

met; for batch setpoints, the digital output is active until the setpoint condition is met.

SENSE NORMAL

INVERT

Specifies whether the state of the digital output associ

ated with this setpoint is inverted

when the setpoint is satisfied.

BRANCH 0

1-20

Specifies the setpoint number to which the batch se

quence is to branch if the current

setpoint is not satisfied upon initial evaluation.

The special value zero indicates that no branch is taken.

START 1

1–20

Specifies the starting se

tpoint number. Do not specify the number of the TIMER or

CONCUR setpoint itself. The TIMER or CONCUR setpoint begins when the starting

setpoint begins.

END 1

1–20

Specifies the ending setpoint number. Do not specify the number of the TIMER or

CONCUR setpoint itself. The TIMER or CONCUR setpoint stops when the ending

setpoint begins.

SETPTS Menu

Parameter Choices Description

Table 3-15. Setpoint Menu Parameters

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 119 120

Comentarios a estos manuales

Sin comentarios

Rice-lake 880 Performance Series Indicator/Controller Techni Manual de usuario Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Escamas Rice-lake 880 Performance Series Indicator/Controller Techni